Rapid Racer Products RRP ProGuard Front Mountain Bike Mudguard

Product Information

COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre FORKS: All forks including Boost forks (except reverse arch) TRAVEL: Any travel snap-off top holes to fit braces between the seatstays whether they’re straight, rasied or dropped (including those with supporting struts)

MINI & STANDARD COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: Important - If you have a brace between the seatstays - you must attach at least one cable tie to it if you don't have a brace between the seatstays - you must use 3 cable ties on each arm Indent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike) The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of our highly polished mold and our special polypropylene mix, this unique mix has been specifically blended for: Both fenders perform great and have mostly been set and forget items. Aside from the occasional extra flex of the Standard, they go unnoticed but you'll make note of the clear vision they provide.DUE TO THE CURRENT HIGH DEMAND, DELIVERY TIME FOR BIKES IS 7-10 DAYS. ALL PARTS AND ACCESSORIES ARE STILL 1-2 DAYS.

Important - The snap-off hole will break off fast so ensure thre is nothing underneath the guard that the screw driver can hit, failure to do so may lead to damage or harm We offer the longer MAX PROTECTION version to be the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection MATERIAL Finally tighten the bolts to the torque settings below: TORQUE SETTINGS: FOX, MARZOCCH & OHLINS = 1nm | SR SUNTOUR = 2nm The MAX Protection version (70mm longer at the rear) offers incredible levels of protection, especially for high speed racing, whereas the standard model offers superb protection in a more lightweight, compact design.a) If we have sent you the incorrect bicycle, we will cover the cost of collection and delivery of the correct model. RapidRacerProducts Ltd, Parkfields Business Centre, Park Street, Stafford, ST17 4AL, United Kingdom RapidRacerProducts Ltd accepts no liability for any damage / injury caused due to improper fitting / use of our products cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring 4 leaving the other 2 for the fork brace (although more could be added if desired) The ProGuard is our amazing new range of FRONT and REAR mudguards for disc brake mountain bikes offering unmatched protection from mud and spray, it’s perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase the tyre clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The MINI offers a very compact design for all year round protection, The STANDARD offers superb protection in a shorter more compact design, whereas the longer MAX PROTECTION version (21mm longer at front than the STANDARD and 68mm longer at the rear) offers incredible unmatched levels of protection. Available in 3 sizes Front Mini:

Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals MATERIAL

What material are mudguards made out of?

INSPECT BEFORE YOU RIDE: DO NOT USE IF DAMAGED IN ANY WAY AS CONTINUED USE MAY LEAD TO FAILURE OR INJURY Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt) snap-off top holes to fit braces between the seat stays whether they’re straight, raised or dropped (including those with supporting struts) This mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.